Cat8 SFTP Patch Cable
Cat8 SFTP Patch Cable
Key Data:
Premium cabling for Category 6 applications—rated for 350 MHz/1 Gbps communications
IEEE 802.3ab
PVC 4-pair stranded UTP
All cables feature boots with integral strain-relief and RJ45 (Male) connectors
Product Details
Meets category 6 cabling standards
Premium cabling for category 6, category 5e and category 5 applications
Color: blue Connectors: RJ45 male
Drastically reduce impedance and structural return loss compared to standard 100MHz wire
High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum
Feature molded connectors with integral strain relief
Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation
PVC 4-pair stranded FTP
Deliver stable performance up to 550MHz/1 Gbps communication
Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)
Available in other colors and lengths
Product Specification
| Wiring Scheme | |
| ANSI/TIA/EIA-568-C.2 | T568A & T568B |
| ISO/IEC 11801 | 8-position conductor/pair assignment (1-2/3-6/4-5/7-8) |
| Pair Identification | Pair1= Blue/White Pair2= Orange/White Pair3= Green/White Pair4= Brown/White |
| Transmission Performance | NSI/TIA-568-C.2 category 7 (1-750 MHz) specifications |
| Constructor | 4 pairs, 7 strands,28 AWG, SFTP |
| Cable Type | SSTP Cat.7 Patch Cable |
| Outer Cable Diameter | 6.0mm ± 0.2 mm |
| Outer Jacket | PVC/LSZH Jacket |
| Type | Shielded RJ45 8P8C Modular Plug |
| Housing | UL listed 94V-0/1/2 flame retardant polycarbonate |
| IDC blades | phosphor bronze, gold plating over 100 μin of nickel in contact area |
| Mechanical | |
| Retention | 50 N (11 lbf) for 60±5 s |
| Mating cycle life | min 750 cycles |
| Tensile strength | ≥ 20 N per wire |
| Installation Temperature | 0°C to +60°C |
| Operating temperature | -20°C to +60°C |
| Minimum bend radius | 4 outer cable diameters |
| Boot Type | Any type of the above picture |
| Length | 0.3m-30m or As per requested |
| Color | Grey/Green/Blue/White/Black/Red/Yellow |
| Package | polybag or Blister Package |
| CONNECTIONS | |
| Side A – Connector 1 | RJ45 (MALE) |
| Side B – Connector 1 | RJ45 (MALE) |
| Contact Plating | Gold |
| PoE Type | Type 2 PoE+ (30W, IEEE 802.3at) |
| Connector Type | Molded; Snagless |
| Wiring Configuration | EIA/TIA 568B |
| COMMUNICATIONS | |
| Bandwidth per TIA Standard | 250 MHz |
| Maximum Bandwidth as Tested | 500 MHz |
| Network Compatibility | 1 Gbps (Gigabit) |
| IEEE Standards Supported | 802.3an; 802.3at |
| Product Compliance | CE (Europe); RoHS; IEEE 802.3ab 1000Base-T; IEEE 802.3at PoE+; REACH; UKCA |
System Requirements/Applications
For wiring camera, infotainment or ticketing systems in road vehicles.
Compliant with standards for use in buses (fire behaviour test according to UNECE-R 118 for vehicles of category M3 (II and III)).
For fixed installation and occasional flexing.
For flexible use in the PROFINET network .
Also suitable for EtherCAT and EtherNET/IP applications.
Can be used in dry and damp environments.
Highly resistant to oils, fuels, alkalis and acids.
Suitable for outdoor use.
Compliant with standards for use in buses (fire behaviour test according to UNECE-R 118 for vehicles of category M3 (II and III)).
For fixed installation and occasional flexing.
For flexible use in the PROFINET network .
Also suitable for EtherCAT and EtherNET/IP applications.
Can be used in dry and damp environments.
Highly resistant to oils, fuels, alkalis and acids.
Suitable for outdoor use.
