Cat6 FTP Patch Cable
Cat6 FTP Patch Cable
Key Data:
Premium cabling for Category 6 applications—rated for 350 MHz/1 Gbps communications
IEEE 802.3ab
PVC 4-pair stranded UTP
All cables feature boots with integral strain-relief and RJ45 (Male) connectors
Product Details
Meets category 6 cabling standards
Premium cabling for category 6, category 5e and category 5 applications
Color: blue Connectors: RJ45 male
Drastically reduce impedance and structural return loss compared to standard 100MHz wire
High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum
Feature molded connectors with integral strain relief
Snagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation
PVC 4-pair stranded FTP
Deliver stable performance up to 550MHz/1 Gbps communication
Meets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)
Available in other colors and lengths
Product Specification
Cable Jacket Color | Blue |
Cable Jacket Material | PVC |
Cable Jacket Rating | CM |
Cable Shielding | FTP |
Cable Outer Diameter (OD) | 6.0 mm |
Number of Conductors | 4 Pair |
Conductor Material | Stranded Copper |
Conductor Gauge | 24 AWG |
Cable Length (m) | 3.05 |
Cable Length (cm) | 304.8 |
Shipping Dimensions (hwd / cm) | 22.86 x 17.78 x 1.27 |
Shipping Weight (kg) | 0.14 |
COMMUNICATIONS | |
Bandwidth per TIA Standard | 250 MHz |
Maximum Bandwidth as Tested | 500 MHz |
Network Compatibility | 1 Gbps (Gigabit) |
IEEE Standards Supported | 802.3an; 802.3at |
Product Compliance | CE (Europe); RoHS; IEEE 802.3ab 1000Base-T; IEEE 802.3at PoE+; REACH; UKCA |
CONNECTIONS | |
Side A – Connector 1 | RJ45 (MALE) |
Side B – Connector 1 | RJ45 (MALE) |
Contact Plating | Gold |
PoE Type | Type 2 PoE+ (30W, IEEE 802.3at) |
Connector Type | Molded; Snagless |
Wiring Configuration | EIA/TIA 568B |
System Requirements/Applications
Compliant with standards for use in buses (fire behaviour test according to UNECE-R 118 for vehicles of category M3 (II and III)).
For fixed installation and occasional flexing.
For flexible use in the PROFINET network .
Also suitable for EtherCAT and EtherNET/IP applications.
Can be used in dry and damp environments.
Highly resistant to oils, fuels, alkalis and acids.
Suitable for outdoor use.